For a commercial project in London, look for a UK manufacturer that employs its own surveyors, fitters and glazing engineers, and that can take the job from the first survey through to the final wet glazing. At Fabco, we employ that team, and we make the frames at our works in West Sussex.
External doors sit on the street, glazed screens divide the office floor, and the drawings can look entirely convincing until you ask who will actually come to site, measure the openings, set the frames, and glaze them while the building is still a working site.
That is the hard part. Who is on the tools?
- We employ our own project engineers, surveyors, fitters and glazing engineers, and we do not outsource those key stages.
- A dedicated project engineer oversees each job from survey through to manufacturing, then hands it to our operations team for installation.
- The process runs from initial design and technical review through to final installation and wet glazing.
- After the frames are fitted, our engineers complete a professional wet-glazing process.
- We use quality-control procedures throughout the manufacturing process.
End-to-end installation. A single employed team taking the job from survey and drawings through manufacture, fitting and final wet glazing, rather than handing stages to a chain of subcontractors.
3D laser survey. A measured survey of the actual openings, used so the frames can be made to the building rather than to a guessed size on the drawing.
Wet glazing. The glass is bedded and sealed into the frame on site by glazing engineers, after the frames have been fitted, rather than being left to a later third party.
How do we take a steel door and screen job from first contact to handover?
At Fabco, one employed team does the survey, the drawings, the making, the fitting and the final wet glazing.
- Professional survey. Our surveyors measure the openings and assess the site before anything is made.
- Dedicated project engineer. They review the technical requirements, keep you updated, and produce drawings for your approval.
- Precision manufacturing. We fabricate the steel windows and doors at our works, to the agreed project requirements.
- Specialist installation. Our employed fitters, who are experienced in architectural steel glazing, set and align the frames.
- Wet glazing and final inspection. Our engineers glaze the frames, then complete quality checks and handover.
That project engineer is the person you deal with until the job is ready for our operations team. The moments on site are where a London job is usually won or lost.
What happens when our surveyors come to site?
Our surveyors measure the actual openings with a 3D laser survey, then carry out a detailed site assessment before production begins.
On a working commercial floor, the openings rarely match the drawing as neatly as anyone hoped. A lintel sits a little low. A finished floor is down, or it is not. Our surveyors come to measure what is actually there.
That measured survey is the site visit we carry out before the factory starts. If you also want someone on site earlier, while the specification is still being written, ask us when you first get in touch.
How are the drawings approved and the frames made?
A dedicated project engineer produces CAD technical drawings for your approval, and we then make the frames at our works in West Sussex.
Use the drawing stage to lock sizes, colours and opening style. Do not let the factory guess. Because the frames are made in the same country as the people who will fit them, a problem on site can go back to the workshop without getting lost.
Who fits and glazes the work, and what support follows handover?
Our own fitters set and align the frames, our glazing engineers then bed and seal the glass on site, and after handover our customer service team remains your point of contact.
A London commercial install often happens around other trades. Hoardings are up. Floors are live, or almost live. Our fitters are used to the care that architectural steel needs: the alignment, the adjustment, the finish on steel doors, steel windows or internal steel doors as much as on a screen.
Once the frames are in, the glass is not handed to a later third party. Our own engineers complete the wet glazing, so the seal and the finish stay with us.
When the job is signed off, our customer service team can advise on maintenance, and our service engineers give on-site help for both warranty and non-warranty issues. See also our aftercare guidance.
What should you ask before you appoint a manufacturer for a London job?
Ask who employs the surveyors, fitters and glaziers, who makes the frames, and whether they will take your particular London project on.
- Who employs the surveyors, fitters and glazing engineers, and who makes the frames?
- Will you measure the actual openings before anything is made, and issue drawings for approval?
- Who glazes the frames once they are in, and who do I call after handover?
- Will you take this particular London commercial project on?
The last question is the one to raise with us on the first call, because coverage for a given London job is something you should hear from us directly.
| If this is your project | What to specify | Why it helps |
|---|---|---|
| A commercial fit-out that needs doors and screens installed by one team | An employed survey, fitting and glazing team, with the frames made in the UK | The openings, the frames and the glass stay with one company through to handover. |
| You are still writing the specification | A technical review at the start, and a clear answer on whether someone can also visit the site at that stage | The measured survey comes before production. An earlier visit is a separate ask. |
| You need the glass finished on a live, or nearly live, floor | Wet glazing by the manufacturer’s own engineers after the frames are fitted | The glass is not left for a later third party on a busy site. |
| You want a single number to call after sign-off | Named aftercare, including on-site help | The job does not end when the hoardings come down. |
Questions people also ask
How do I request a quotation for a commercial steel door or glazed screen project?
Get in touch with us and we will start with a technical review of your project requirements. A project engineer then coordinates with you and the survey team. That early conversation is the right moment to talk through the scope of the job, including a London commercial site.
Can you review the design or specification before the site survey?
Yes. Our process includes an initial design and technical review of the project requirements, overseen by the project engineer. That review is not the same as a visit to site. If you also want us there while the brief is still being written, raise it on the first call.
Do you install internal glazed screens and steel windows as well as external doors?
Yes. We make steel windows and doors, and our fitters are experienced in architectural steel glazing systems, which includes the external doors, internal doors and glazed screens on a commercial floor. The same process runs through to installation and wet glazing.
Does the glazing silicone match the colour of the steel frames?
Yes. We use RAL colour-matched silicone during the wet-glazing process, chosen for its colour-fast properties, so the seal complements the frame finish and holds its colour in sunlight. This is part of the finishing work our engineers carry out once the frames are in.
Who do I contact with a question once the installation is finished?
Our customer service team is the first point of contact for questions after installation, supported by our technical and operations team. They can arrange on-site help when you need it, and they remain available once the job has been signed off.